Frame rate guide

24fps vs 30fps what changes, how it looks, and which to use

The frame time, motion blur and file-size differences between 24 and 30 frames per second, worked out; where 23.976 and 29.97 come from; what each platform accepts; and when 60 fps is the better answer.

Standards, platform pages and Apple's specs checked November 12, 2026

24fps is the cinema rate: each frame is on screen for 41.7 ms and, shot at a 1/48 s shutter, carries more motion blur, the "film look". 30fps holds each frame 33.3 ms and looks slightly crisper; it is the usual rate for online video, phones and screen recordings. For a launch or product video, use 30 fps: Instagram Reels asks for at least 30.

What is the difference between 24fps and 30fps?

30 fps shows 25% more frames each second, so each one is on screen for less time: 41.7 ms at 24 fps against 33.3 ms at 30. Side by side:

24 fps30 fps
Frames per second2430
Each frame is on screen for41.7 ms33.3 ms
Frames per minute1,4401,800
60 Hz broadcast version23.976 (24000/1001)29.97 (30000/1001)
Shutter speed at 180°1/48 s (20.8 ms)1/60 s (16.7 ms)
Motion blur per frame, object crossing 1080p in 2 s20 px16 px
Jump between frames, same object40 px32 px
YouTube 1080p upload bitrate8 Mbps8 Mbps
Data per frame at 8 Mbps333 kbit267 kbit
Instagram Reels (at least 30 fps)Below the minimumMeets it

Frame times, frames per minute, shutter speeds, blur and data per frame are our arithmetic. Exact 60 Hz rates from ITU-R BT.709-6; shutter angle from RED; bitrate from YouTube Help; Instagram's minimum from its help page (all linked below). The moving object is an example: 960 pixels a second, which crosses a 1920-pixel frame in 2 seconds.

Why does 24fps look more cinematic than 30fps?

Two things change together: how long each frame stays up, and how much blur is baked into it. Cameras are usually set relative to the frame rate. RED describes the shutter angle as "a useful way of describing the shutter speed relative to the frame rate", and says the most common setting for cinema has been a shutter angle near 180°, "a shutter speed near 1/48 of a second at 24 fps" (RED, checked November 12, 2026). Larger angles look more smeared; smaller ones, more stuttered.

So at a 180° shutter, each 24 fps frame is exposed for 20.8 ms and each 30 fps frame for 16.7 ms. In our example the object smears across 20 pixels in a 24 fps frame and 16 at 30, then jumps 40 against 32 pixels to the next frame. Longer blur and bigger steps are the difference you see. The steps show most on fast camera pans, so at 24 fps keep camera moves slow.

Shutter angle24 fps30 fps60 fpsLook (RED)
90°1/96 s1/120 s1/240 sMore stuttered
180°1/48 s1/60 s1/120 sStandard cinematic
270°1/32 s1/40 s1/80 sMore smeared
360°1/24 s1/30 s1/60 sShutter as slow as the frame rate

Shutter speed = (angle ÷ 360) ÷ frame rate, our arithmetic, consistent with RED's 1/48 s at 180° and 24 fps and its 360° limit.

Why is it 23.976 and 29.97, not 24 and 30?

In 60 Hz television systems, the whole-number rates also exist slowed by 1000/1001. ITU-R BT.709 specifies picture rates of 60, 50, 30, 25 and 24 Hz, and "for the 60, 30 and 24 Hz systems, picture rates having those values divided by 1.001" (ITU-R BT.709-6, section 2). So 29.97 is really 30000/1001 = 29.97003 fps, and 23.976 is 24000/1001 = 23.97602 fps. US digital broadcasting lists all of them: ATSC A/53 Part 4, Table 6.2, gives frame rates of 23.976, 24, 29.97, 30, 59.94 and 60 Hz (ATSC A/53 Part 4:2009).

For film and broadcast that is the whole story: 24 is the cinema rate, 29.97 the NTSC-family broadcast rate, and 23.976 is film delivered into a 60 Hz system. For web video, whole numbers and the 1.001 rates both work; what matters is keeping one rate from shoot to export. Timecode at 29.97 needs drop-frame counting to match the clock; the frame rate calculator converts frames, seconds and drop-frame timecode.

What frame rate do YouTube and other platforms accept?

YouTube says "Content should be encoded and uploaded in the same frame rate it was recorded", and names 24, 25, 30, 48, 50 and 60 fps as common rates, with others acceptable too (YouTube Help, checked November 12, 2026). The other platforms' published rules:

PlatformPublished frame-rate rule24 fps30 fps60 fps
LinkedIn10 to 60 fps (source)YesYesYes
Xup to 40 fps (web) (source)YesYesAbove the maximum
Instagram Reelsat least 30 fps (source)Below the minimumYesYes
YouTubethe rate it was recorded at (source)YesYesYes
Facebook24 to 60 fps recommended (source)YesYesYes
Threads (API docs)23 to 60 fps (source)YesYesYes
Vimeonative and constant; over 60 fps is reduced (source)YesYesYes
App Store app previews30 fps maximum (source)YesYesAbove the maximum

From each platform's help pages (Threads: Meta's API docs), checked November 4 and 10, 2026; App Store from Apple's app preview specifications. The yes/no columns are our reading of each rule. TikTok is left out because we couldn't verify its help pages.

30 fps passes every rule in the table; 24 fps misses one, Instagram Reels' 30 fps minimum. That alone makes 30 the default for anything that will be posted as a Reel.

Does 30fps need more bitrate than 24fps?

Not by YouTube's numbers. Its recommended upload bitrates group 24, 25 and 30 fps together: 8 Mbps at 1080p and 35 to 45 Mbps at 4K for SDR (YouTube Help). Same bitrate, same file size, so at 30 fps each frame simply gets 267 kbit instead of 333. The step up comes at 48 to 60 fps, where YouTube recommends 12 Mbps at 1080p. File sizes for any bitrate: video bitrate and the video file size calculator.

Can you convert 24fps to 30fps, or 30 to 24?

Only with a compromise, because 24 and 30 are in a 4:5 ratio (our arithmetic). Going up, one frame in every four has to be shown twice to fill 30 a second, which can make motion slightly uneven; playing the same 24 frames at 30 fps instead makes the video 25% faster. Going down from 30 to 24 means dropping one frame in five, or slowing the video to 80% speed. The clean route is to pick the rate before you shoot or render.

What frame rates does an iPhone record?

Apple's iPhone 17 Pro tech specs list 4K recording at 24, 25, 30, 60, 100 or 120 fps and 1080p at 25, 30, 60 or 120 fps, with Cinematic mode up to 4K at 30 fps (Apple). The iPhone 16 lists 4K at 24, 25, 30 or 60 fps and 1080p at 25, 30 or 60 (Apple). So 24 fps on an iPhone means shooting 4K, and Cinematic mode is 30. Screen sizes for those phones: iPhone screen resolution.

When should you use 24fps, and when 30fps?

What about 60fps?

60 fps halves the frame time again, to 16.7 ms, and the jump between frames in our example drops to 16 pixels, so scrolling UI, sports and games look much smoother, and you can slow it to half speed in a 30 fps edit. It costs more: YouTube recommends 12 Mbps at 1080p instead of 8 (53 to 68 Mbps instead of 35 to 45 at 4K). And it doesn't fit everywhere: X's web limit is 40 fps and App Store app previews allow 30 at most (table above). For a launch video, export 30 fps unless the cut is all fast scrolling and only going to YouTube.

Sources

24fps vs 30fps FAQ

Is 24fps or 30fps better?
Neither in general. 24 fps is the cinema rate: each frame lasts 41.7 ms and, at a 180° shutter, carries more motion blur, which reads as the film look. 30 fps lasts 33.3 ms a frame and looks a little crisper; it is the safer choice for online video, screen recordings and product demos, and Instagram Reels lists 30 fps as its minimum.
Why do movies use 24fps?
24 fps is the cinema picture rate; ITU-R BT.709 lists 24 Hz alongside 25, 30, 50 and 60. Its look comes from the long frame time and the motion blur of a shutter near 180°, which RED calls by far the most common setting for cinema.
Does 30fps look smoother than 24fps?
A little. 30 fps shows 25% more frames, so a moving object jumps 32 pixels between frames instead of 40 in our example (crossing a 1920-pixel frame in 2 seconds). The bigger jump to smooth is 60 fps, at 16 pixels.
What is the 180-degree shutter rule?
Set the shutter speed to half the frame time: 1/48 s at 24 fps and 1/60 s at 30 fps. RED describes a 180° shutter angle as about 1/48 s at 24 fps, giving a standard cinematic look; larger angles look more smeared and smaller ones more stuttered.
Is 29.97 the same as 30 fps?
Nearly. 29.97 is 30000/1001 frames per second, 0.1% slower than 30. ITU-R BT.709 specifies 30 Hz and 30 Hz divided by 1.001, and US digital broadcasting (ATSC A/53 Part 4) allows both 29.97 and 30, as well as 23.976 and 24.
Can you convert 24fps to 30fps?
Yes, but not cleanly. 24 and 30 are in a 4:5 ratio, so either one frame in every four is shown twice, which can make motion uneven, or the video plays 25% faster. Shoot or render at the rate you will deliver where you can.
Does 30fps make a bigger file than 24fps?
Not at YouTube's recommended bitrates: it gives the same 8 Mbps for 1080p at 24, 25 or 30 fps, so the file is the same size and each frame gets 20% fewer bits (267 kbit against 333). YouTube's bitrate only rises, to 12 Mbps, at 48 to 60 fps.
Should I film in 24 or 30 fps on iPhone?
Either works for 4K: Apple lists 4K recording at 24, 25, 30 or 60 fps on the iPhone 16 and 17 Pro. At 1080p the same specs list 25, 30 and 60 fps, not 24, and Cinematic mode records 4K at 30 fps. For social video, 30 fps meets Instagram Reels' 30 fps minimum.

Related: Frame rate calculator · Video bitrate · Video file size calculator · Instagram Reels specs · YouTube video specs · Video specs checker · iPhone screen resolution

Make the launch video first

Paste your product link. nod writes the script, designs the scenes and adds voiceover and music.